Mitsubishi Electric GOT2000 Series Hardware User Manual page 91
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (654 pages) ,
- Basic training textbook (255 pages)
Table of Contents
Advertisement
*1 As a characteristic of liquid crystal display panels, bright dots (always lit) and dark dots (never lit) may appear on the panel.
Since liquid crystal display panels comprise a great number of display elements, the appearance of bright and dark dots cannot be
reduced to zero.
Individual differences in liquid crystal display panels may cause differences in color, uneven brightness and flickering.
Note that these phenomena are characteristics of liquid crystal display panels and it does not mean the products are defective or
damaged.
*2 Flickering may occur due to vibration, shock, or the display colors.
*3 When a stylus is used, the touch panel has a life of 100 thousand touches.
The stylus must satisfy the following specifications.
Material: Polyacetal resin
Tip radius: 0.8 mm or more
*4 To prevent the display section from burning in and lengthen the backlight life, enable the screen save function and turn off the backlight.
*5 If you touch two points or more simultaneously on the touch panel, a touch switch near the touched points may operate unexpectedly.
Do not touch two points or more simultaneously on the touch panel.
*6 To conform to IP67F, close the USB environmental protection cover by pushing the [PULL] mark firmly.
(The GOT conforms to IP2X when the USB environmental protection cover is open.)
Note that the structure does not guarantee protection in all users' environments.
The GOT may not be used in an environment where the GOT is exposed to oil or chemicals for a long time, or where oil mist fills the air.
*7 For the GOT multi-drop connection, set the terminating resistor setting switch of the GOT according to the connection type.
For details on the GOT multi-drop connection, refer to the following.
GOT2000 Series Connection Manual (Mitsubishi Electric Products) For GT Works3 Version1
*8 The minimum size of a key that can be arranged.
To ensure safe use of the product, the following settings are recommended.
Key size: 16 × 16 dots or larger
Distance between keys: 16 dots or more
*9 The suffix "F" of IP67F is a symbol that indicates protection rate against oil. It is described in the Appendix of Japanese Industrial
Standard JIS C 0920.
3 SPECIFICATIONS
3.2 Performance Specifications
3
89
Advertisement
Table of Contents
Troubleshooting
