Mitsubishi Electric GOT2000 Series Hardware User Manual page 297

Part name
2) 3)
3)
3)
3) 1) 3)
No. Name
1) Connector for Handy GOT connection (D-sub 37-
pin (female))
2) Power switch
3) Mounting hole
4) Terminal block 1
5) Terminal block 2
6) Connector for PLC (RS-422: D-sub 9-pin female)
7) Connector for PLC (RS-232: D-sub 9-pin male)
*1 The cable for the ES-3 signal is provided in the connector conversion box GT11H-CNB-37S regardless of whether the terminal name
ES-3 is printed on the box or not.
External dimensions
82(3.23)
When the terminal block cover is open
Specifications
Connects the Handy GOT through an external cable.
Supplies the power to the Handy GOT.
When this switch is set to ON, the power is supplied.
Turn off this switch when attaching or removing the Handy GOT.
Used to fix the connector conversion box to a panel directly or to a board with the mounting
fixtures.
For M3 screw.
Connects the GT11H-CNB-37S, the 24 V DC power supply of Handy GOT, and the operation
switch (SW1 to 6).
With M3 terminal screws and the cover
Connects the operation switch of the Handy GOT (SW1 to 6), the grip switch (DSW-1, 2) and the
keylock switch (KSW-1, 2).
With M3 terminal screws and the cover
Connects the PLC through a PLC connection cable.
RS-422 and RS-232 are not available simultaneously.
When the terminal block cover is open
37.5(1.48)
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
4) 5)
Terminal name: ES3 *1
6) 7)
Weight: Approx. 0.17kg (0.4 lb)
Unit: mm (inch)
7.1 Connector Conversion Box
7
295