Mitsubishi Electric GOT2000 Series Hardware User Manual page 204

1.
Install the supplied fittings on the top and bottom of the GOT with screws.
Each fitting has two types of holes as shown below.Use the appropriate type of holes according to the control panel thickness.
Hole A: for the control panel thickness 1.5 mm to 3.0 mm
Hole B: for the control panel thickness 2.0 mm to 4.0 mm
When installing the fittings on the GOT, you are recommended to put a cloth or others under the GOT to prevent the display
section from being damaged.
2.
Align the installation holes of the fittings with the studs, and insert the studs in the holes.
GOT
6 INSTALLATION AND REMOVAL
202
6.6 Installing the GOT
Fittings (Top: 1, bottom: 1)
Screws (Top: 3, bottom: 3)
1.5 2.0
3.0
4.0
Hole A Hole B
Fittings
Stud
panel opening
Cloth