Mitsubishi Electric GOT2000 Series Hardware User Manual page 277

■Installation on the DIN rail
Install the connector conversion box on the DIN rail with using its DIN rail hook.
Applicable DIN rail
The clearance between screws for installing the DIN rail should be 150 mm or less.
DIN rail depth
more than 10mm (0.4 "inch )
1.
Pull out the hook for DIN rail.
ON
OFF
2.
Adapt the upper side of the DIN rail installation slot to the DIN rail.
3.
Press the connector conversion box against the DIN rail, and lock the hook for DIN rail.
When installing the DIN rail, fix the cables.
Otherwise, the hook for DIN rail and other parts may be damaged by the cable load.
ON
OFF
DIN46277 (width: 35 mm)
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
7.1 Connector Conversion Box
7
275