Gt25Hs-V - Mitsubishi Electric GOT2000 Series Hardware User Manual

GT25HS-V

The following shows the installation procedure, taking GT2506HS-V as an example.
1.
Open the interface environmental protection cover in the arrow-pointing direction.
Front
2.
Set the SD card access switch of the GOT to OFF, and check that the SD card access LED turns off.
Interface environmental
protection cover
SD card
access switch
3.
Eject and remove the SD card.
4.
Close the interface environmental protection cover.
Front
6 INSTALLATION AND REMOVAL
258
6.13 Removing the SD Card
MEMORY
SD card
Interface
SD card
access LED