Mitsubishi Electric GOT2000 Series Hardware User Manual page 47

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

Product name
Model
*11
Attachment
GT15-70ATT-98
GT15-70ATT-87
GT15-60ATT-97
GT15-60ATT-96
GT15-60ATT-87
GT15-60ATT-77
GT15-50ATT-95W
GT15-50ATT-85
GT21-04RATT-40
Battery
GT11-50BAT
*9
Special fitting
GT25-12FIT-EXS
GT25-10FIT-EXS
*1 The white model does not have a front USB interface.
Use a protective sheet without a hole for the USB environmental protection cover.
*2 When using a protective sheet without a hole for the USB environmental protection cover, the front USB interface cannot be used.
*3 Check if the protective cover for oil can be used in the actual environment before use.
When using the protective cover for oil, you cannot use the front USB interface and the human sensor.
*4 Including the GP250□ and GP260□ manufactured by SCHNEIDER EJH.
*5 GT2103-P does not have a built-in battery.
*6 GT21 does not support the system status log data backup function.
*7 Only available to GT2512F-S, GT2510F-V, and GT2508F-V.
*8 Only available to GT2104-RTBD.
*9 Necessary for the GOT to comply with the ATEX directive and KCs regulation.
For applicable GOT models, refer to Mitsubishi Electric FA Global Website.
www.MitsubishiElectric.com/fa
*10 The protective sheet is shaped not to cover the USB environmental protection cover.
*11 An attachment is usable when the control panel has a thickness of 2 to 3 mm.
When an attachment is used, the GOT is not IP67F-rated.
*12 Only available to GT2507T-W.
*13 Only available to GT2705-V.
*14 Only available to GT2505-V.
*15 Only available to GT2107-W.
Description
For 10.4"
For replacing GT168□, GT158□, A985GOT
For replacing A870GOT-SWS/TWS or A8GT-
70GOT-TB/TW/SB/SW
For 8.4"
For replacing GT167□, GT157□, or
A97□GOT
For replacing A960GOT
For replacing A870GOT-EWS, A8GT-
70GOTEB/EW, A77GOT-EL, or A77GOT-EL-
S5/S3
For replacing A77GOT-CL, A77GOT-CL-S5/
S3, A77GOT-L, or A77GOT-L-S5/S3
For 5.7"
For replacing A956WGOT, F940WGOT
For replacing A85□GOT
For 4.3"
For replacing GT104□
Battery for backup of SRAM data, clock data, and system
*6
status log data.
For 12.1"
For compliance with the ATEX directive and
KCs regulation
For 10.4"
Supported model
GT27
GT25
GT23
GT21
*4
(Replac
(Replac
(Option
(Replac
ement)
ement)
)
ement)
2 System configuration
2.2 System Equipment
2
*8
*5
45

Advertisement

Table of Contents
loading

Table of Contents