Mitsubishi Electric GOT2000 Series Hardware User Manual page 43

Option unit
Product name Model
Printer unit GT15-PRN
Multimedia unit GT27-MMR-Z
Video input unit GT27-V4-Z
RGB input unit GT27-R2
GT27-R2-Z
Video/RGB input unit GT27-V4R1-Z
RGB output unit GT27-ROUT
GT27-ROUT-Z
Digital video output unit GT27-VHOUT
Sound output unit GT15-SOUT
External I/O unit GT15-DIOR
GT15-DIO
SD card unit GT21-03SDCD
*1 Not available to GT2705.
*2 Only available to GT2103-PMBD, GT2103-PMBDS, and GT2103-PMBDS2.
*3 The settings for GT27-R2 and GT27-R2-Z differ in the screen design software.
*4 Not available to GT2510-WXTBD, GT2510-WXTSD, GT2507-WTBD, GT2507-WTSD, GT2507T-WTSD, GT2505-VTBD, GT2506HS-
VTBD, and GT2505HS-VTBD
Specifications
USB slave (PictBridge) for printer connection, 1 channel
Cable for connection between printer unit and printer (3m)
included
For video input (NTSC/PAL), 1 channel, recording video/playing
video files
(A set of GT16M-MMR-Z and GT27-IF1000)
For video input (NTSC/PAL), 4 channels
(A set of GT16M-V4-Z and GT27-IF1000)
For analog RGB input, 2 channels (Simultaneous display)
For analog RGB input, 2 channels (Display by channel)
(A set of GT16M-R2-Z and GT27-IF1000)
For video input (NTSC/PAL), 4 channels/analog RGB, 1 channel
input
(A set of GT16M-V4R1-Z and GT27-IF1000)
For analog RGB output, 1 channel
For analog RGB output, 1 channel
(A set of GT16M-R2-Z and GT27-IF1000)
For digital video output, 1 channel
HDMI Type A connector
For sound output (φ3.5 stereo pin jack)
For connecting an external I/O device and an operation panel
(Negative common input, source type output)
For connecting an external I/O device and an operation panel
(Positive common input, sink type output)
For installing an SD card
Supported model
GT27 GT25 GT23
*4
○ ○ —
*1
○ — —
*1
○ — —
*3 *1
○ — —
*3 *1
○ — —
*1
○ — —
*1
○ — —
*1
○ — —
*1
○ — —
*4
○ ○ —
*4
○ ○ —
*4
○ ○ —
— — —
2 System configuration
2.2 System Equipment
GT21
—
2
—
—
—
—
—
—
—
—
—
—
—
*2
○
41