Mitsubishi Electric GOT2000 Series Hardware User Manual page 286

Click the [Add] button in the [Project] tab.
In the [Trigger] tab, set [ON] for [Trigger Type] of Trigger 1.
Set [GB40] for [Trigger Device].
Operation setting
Store the value set by the rotary switch to the station No. switching device (GD500).
The station No. switching device stores unsigned 16-bit data. The 8 higher-order bits represent a network number, and the 8
lower-order bits represent a station number.
Configure the following settings.
In the [Action] tab, set [Data Set 16bit] for [Action] and [Unsigned BIN16] for [Data].
Set a station No. switching device [GD500] to [Device].
To set the rotary switch value of the connector conversion box, select [Indirect].
Click the [...] button to display the [Select CH No.] dialog.
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
284
7.1 Connector Conversion Box