Installing the battery to GT2510-WX, GT2507-W, GT2507T-W
The following shows the battery installation procedure, taking GT2510-WX as an example.
1.
Make sure that the GOT power is off.
2.
Install the battery to the GOT rear face.
Open the battery cover as shown below.
Battery cover
3.
To replace the battery, remove the old battery, and then disconnect the connector.
For information on how to remove the battery, refer to the following.
Page 237 Removing the Battery
4.
Insert the battery connector to the GOT connector.
Battery cover
Battery
Connector
6 INSTALLATION AND REMOVAL
230
6.10 Installing the Battery