Mitsubishi Electric GOT2000 Series Hardware User Manual page 276

■Mounting on the panel face (When setting the connector for Handy GOT connection and the
power supply switch on the panel surface)
1.
Drill a mounting slot of the following size on the panel face.
43±0.2
(1.69±0.01)
2.
Mount the connector conversion box on the control panel.
Tighten the screws within the specified torque range (0.69 N•m to 0.88 N•m).
Overtightening the screws may cause damage.
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
274
7.1 Connector Conversion Box
Drill 4- 5±0.5 (0.2±0.02)
Panel cut area
Unit: mm (inch)
M4 screw and nut
× 4 sets 4- 4.5 (0.18)
(prepared by user)
43 (1.7) 6 (0.24)
ON
OFF
Unit: mm (inch)