Removing the battery from GT2505HS-V
The following shows the battery removal procedure.
1.
Make sure that the GOT power is off.
2.
Loosen the environmental protection back cover screws at four points on GOT rear face to remove the cover.
3.
Remove the battery from the GOT, and unplug the battery connector.
4.
Attach the environmental protection back cover and tighten the screws within the specified torque range (0.36 N•m to
0.48 N•m).
6 INSTALLATION AND REMOVAL
242
6.11 Removing the Battery
Environmental
protection
back cover
screw
Battery
Connector for
battery connection