GT27, GT25 (except GT25-W and GT2505-V), and GT23
GT27, GT25 (except GT25-W and GT2505-V), GT23
1.
Open the SD card cover as shown below.
2.
Make sure that the SD card access LED is off when the SD card cover is open 90 degrees or more, and then insert an
SD card with its front side up.
SD card access LED
3.
Push and close the SD card cover until it clicks.
4.
When the SD card cover is closed, the access to the SD card is allowed.
Open the cover of the SD card
interface 90 degrees or more.
6 INSTALLATION AND REMOVAL
6.12 Installing the SD Card
6
247