Mitsubishi Electric GOT2000 Series Hardware User Manual page 352

■When avoiding to set the connector conversion box not to the emergency stop state while
Handy GOT is removed
Handy GOT
ES1
ES2
ES3
Pin layout
Product name
Connector conversion box
Precautions when using the emergency stop switch
When using the emergency stop switch of the Handy GOT, use the emergency stop switch according to your
risk assessment.
When using the parallel circuit (which sets the connector conversion box to the emergency stop status while
Handy GOT is removed), the system may not match the safety standards.
Before using the system, please check the safety standards which are required.
If a shock which exceeds the general specifications of the Handy GOT is applied, a chattering may occur in
the emergency stop switch due to the structure of the switch. Check your usage condition and decide whether
to use or not.
9 HANDY GOT POWER WIRING AND SWITCH HANDLING
350
9.4 Switch Wiring
Connector
conversion box
Model Terminal No.
ES1A or
ES1
GT16H-CNB-42S Terminal block
1
20
GT11H-CNB-37S Terminal block
GT16H-CNB-37S 2
13
Terminal
block 2
14
ES1
13
12
ES2
11
1
ES3
2
ES1B ES2A or
ES2
Terminal block Terminal block
1 1
19 18 17 16
Terminal block
2
14 11
Used as control
signals of external
device power ON/OFF
ES2B ES3A or
ES3
Terminal block Terminal block
1 1
15 14 13 12
Terminal block
2
12 1
ES3B
Terminal
block 1
11 10 9
2