Removing the USB devices
For GT27 and GT25 equipped with the USB interface (Host) on the front face
1.
Place the USB device in removable mode.For the setting method, refer to the following.
GOT2000 Series User's Manual (Utility)
2.
Remove the USB device from the USB interface (Host) as shown below.
3.
Push the [PUSH] mark on the USB environmental protection cover to close the cover.
For GT27, GT25, GT23, and GT2107-W equipped with the USB interface (Host) on the
rear face
1.
Place the USB device in removable mode.For the setting method, refer to the following.
GOT2000 Series User's Manual (Utility)
2.
Remove the USB device from the USB interface (Host) as shown below.
6.14 Installing and Removing the USB Devices (GT27, GT25, GT23, GT2107-W)
6 INSTALLATION AND REMOVAL
6
261