Part Names; Part Names And Settings Of The Gt1595 - Mitsubishi Electric GOT1000 General Description Manual

2.Part Names

2.1 Part Names and Settings of the GT1595

16)
2),3)
1)
4)
14)
5)
No. Name
1) POWER LED
2) Display screen
3) Touch key
4) USB interface
5) RS-232 interface
6) Power terminal
7) Extension interface
8) CF card interface
9) CF card access LED
10) CF card access switch
Optional function board
11)
interface
Multi-color display board
12)
*1
interface
13) Reset switch
14) Hole for unit installation fitting
15) Battery holder
16) Human sensor
17) Installation switch
*1 For the multi-color display board, refer to the following.
6)
Lit in green:Power is correctly supplied
Lit in orange:Screen saving
Blinks in orange/green:Blown back light bulb
Not lit :Power is not supplied
Displays the Utility and the user creation screen.
For operating touch switches in the Utility and the user creation screen
For connecting a personal computer
(Connector type: MINI-B)
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
Power input terminal, LG terminal, FG terminal
For installing an extension unit
For installing a CF card
Lit :CF card accessed
Not lit:CF card not accessed
Used for stopping the access to the CF card before removing the CF
card from the GOT
ON :CF card being accessed
(CF card removal prohibited)
OFF :CF card not accessed
(CF card removal possible)
For installing the optional function board
For installing the multi-color display board
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit
installed)
Hole for inserting the unit installation fitting
Houses the battery
Sensor that detects human movement
Used for OS installations at the GOT startup
3.2.1 GT1595-X
GOT Rear face
11)
14)
Description
3
7) 13) 17)
8)
15)
9)
10)
12)