GT27, GT25 (except GT25-W and GT2505-V), and GT23
GT27, GT25 (except GT25-W and GT2505-V), GT23
1.
Open the SD card cover as shown below.
2.
Make sure that the SD card access LED is off when the SD card cover is open 90 degrees or more, and then push the
SD card in to eject it.
SD card access LED
3.
Close the cover of the SD card interface.
6 INSTALLATION AND REMOVAL
254
6.13 Removing the SD Card
Open the cover of the SD card
interface 90 degrees or more.