Mitsubishi Electric GOT2000 Series Hardware User Manual page 290

Part name
2)
3)
3)
3) 1)
No. Name
1) Connector for Handy GOT connection (D-sub 37-pin
(female))
2) Power switch
3) Mounting hole
4) Terminal block 1
5) Terminal block 2
6) External connection device communication connector
(Ethernet: RJ-45 modular jack)
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
288
7.1 Connector Conversion Box
3)
3)
Specifications
Connects the Handy GOT through an external cable.
Supplies the power to the Handy GOT, when this switch is set to ON.
Turn off this switch when attaching or removing the Handy GOT.
Used to fix the connector conversion box to a panel directly or to a board with the mounting
fixtures.
For M3 screw
Connects the GT16H-CNB-37S, the 24 V DC power supply of Handy GOT and the operation
switch (SW1 to 6).
With M3 terminal screws and the cover
Connects the emergency stop switch of the Handy GOT (ES1, 2, and 3), the grip switch
(DSW-1, 2) and the keylock switch (KSW-1, 2).
With M3 terminal screws and the cover
Connects the external connection device via Ethernet with using a LAN cable.
When the terminal block cover is open
Weight: Approx. 0.2 kg (0.4 lb)