Installing The Battery To Gt2505Hs-V - Mitsubishi Electric GOT2000 Series Hardware User Manual

4.
Attach the environmental protection back cover and tighten the screws within the specified torque range (0.36 N•m to
0.48 N•m).
5.
Turn on the GOT.
6.
Check that the battery condition is normal with the utility.
For the details of the battery condition display, refer to the following.
GOT2000 Series User's Manual (Utility)

Installing the battery to GT2505HS-V

The following shows the battery installation procedure.
1.
Make sure that the GOT power is off.
2.
Loosen the environmental protection back cover screws at four points on GOT rear face to remove the cover.
3.
Insert the battery connector to the connector for battery connection on the GOT, and put the battery into place.
6 INSTALLATION AND REMOVAL
232
6.10 Installing the Battery
Environmental
protection
back cover
screw
Environmental
protection
back cover
screw