Installing The Battery To Gt2708, Gt2705, Or Gt2508 - Mitsubishi Electric GOT2000 Series Hardware User Manual

5.
After installing the battery to the battery holder of the GOT, close the battery cover until it clicks.
Battery
6.
Turn on the GOT.
7.
Check that the battery condition is normal with the utility.
For the details of the battery condition display, refer to the following.
GOT2000 Series User's Manual (Utility)

Installing the battery to GT2708, GT2705, or GT2508

The following shows the battery installation procedure, taking GT2708 as an example.
1.
Make sure that the GOT power is off.
2.
Install the battery inside the SD card cover on the side of the GOT.
Open the SD card cover as shown in the following figure.
6 INSTALLATION AND REMOVAL
228
6.10 Installing the Battery
Battery cover
Connector
SD card cover