Mitsubishi Electric GOT2000 Series Hardware User Manual page 268

Precautions on installing the panel-mounted USB port extension
Run power lines, servo amplifier drive wires, and panel-mounted USB port extensions so that they do not cross each other.
Install the panel-mounted USB port extension away from noise sources such as equipment.
Do not twist, bend at a sharp angle or a right angle, and stretch the panel-mounted USB port extension since the cable may
be broken.
Install it while considering the following control panel inside dimensions.
Dimensions in the depth direction of the GOT
80 (3.15)
or more
Dimension of the protruding cable
80 (3.15) or more
Insert the USB plug part of the tip of the panel-mounted USB interface (Host) extension securely to the USB port of the GOT.
The USB plug part may work loose or become unplugged due to vibrations, impacts, or being yanked.
Use cable ties or others to fix the cable portion to the structure inside the control panel, the cable fixing hole on the GOT, or
others.
6 INSTALLATION AND REMOVAL
266
6.16 Installing and Removing the Panel-Mounted USB Port Extension
Unit: mm (inch)
Unit: mm (inch)