Mitsubishi Electric GOT2000 Series Hardware User Manual page 231

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

To replace the battery, remove the old battery, and then disconnect the connector.

For information on how to remove the battery, refer to the following.

Page 237 Removing the Battery

Insert the battery connector to the GOT connector.

After installing the battery to the battery holder of the GOT, close the SD card cover until it clicks.

Turn on the GOT.

Check that the battery condition is normal with the utility.

For the details of the battery condition display, refer to the following.

GOT2000 Series User's Manual (Utility)

SD card cover

SD card cover

6 INSTALLATION AND REMOVAL

6.10 Installing the Battery

Troubleshooting