Mitsubishi Electric GOT2000 Series Hardware User Manual page 338

■Remedy 2 (Refer to the figures Remedy 2-1 and 2-2 below.)
Attach a ferrite core to the cable if noise from the GOT panel has adverse effects on the GOT when Remedy 1 is taken.
Wind the wire around the ferrite core several times (approx. 3 times), if a ferrite core is used.
When using the connector conversion box
If the wiring method as shown in Remedy 2-1 is not feasible, follow Remedy 2-2.
Connection cable
Ground cable from
the panel that houses
control equipment
Use the thickest
cable possible.
Panel grounding
When using the external cable
If the wiring method as shown in Remedy 2-3 is not feasible, follow Remedy 2-4.
Connection cable
Ground cable from
the panel that houses
control equipment
Use the thickest
cable possible.
9 HANDY GOT POWER WIRING AND SWITCH HANDLING
336
9.2 Power Wiring
Connector
conversion box
FG
Ferrite core
Remedy2-1
FG
Ferrite core
Panel grounding
Remedy2-3
Connector
conversion box
Connection cable
Ground cable from
the panel that houses
control equipment
Use the thickest
cable possible.
Panel grounding
Connection cable
Ground cable from
the panel that houses
control equipment
Use the thickest
cable possible.
FG
Ferrite
core
Remedy2-2
FG
Ferrite core
Panel grounding
Remedy2-4