Example
Command
Function
Command Modes
Command format
Parameter
Description
Example
The command shall be configured in global mode on 8902 rack.
Configuration doesn't work for specifying line card.
VPLS cross-card forwarding function shall be configured on corre-
sponding line cards.
To enable VPLS cross-card forwarding function on all cards, exe-
cute the following command:
ZXR10(config)#config fabric vpls enable
To disable VPLS cross-card forwarding function on line card in slot
1, execute the following command:
ZXR10(config)#con fabric vpls slot 1 disable
show fabric vpls config
This command is used to show all line cards configured with VPLS
cross-card forwarding function.
All Modes
show fabric vpls config [slot <1-12>]
Parameter
<1-12>
To show all line cards currently configured with VPLS cross-card
forwarding function, execute the following command:
ZXR10(config)#show fabric vpls config slot
vpls 1
enable 2
To show line card in slot 2 currently configured with VPLS cross-
card forwarding function, execute the following command:
ZXR10(config)#show fa vpls config slot 2 slot
vpls 2
enable
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 VPLS Configuration
Description
This is line card number, in range of 1-12.
enable
75