New Commands In Dpi Config Mode; Command Bind Mng-Server-Ip - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Mode
Command Format
Parameter
Description
8
C h a p t e r
New Commands in DPI
Config Mode
Table of Contents

Command bind mng-server-ip .........................................31

Command clear connection-all ........................................32
Command commit ...........................................................32
Command log-file list-dir ................................................32
Command log-file delete-dir ............................................33
Command log-file delete-file ...........................................33
Command set active -save-interval .................................34
Command show connection-by-ip ...................................34
Command show dpi-vlan-binding .....................................35
Command show dpi-mng-ip .............................................35
Command update signature-file ......................................36
Command upload auto ....................................................36
Command upload interval ...............................................36
Command update dpi-log ................................................37
Command upload today-log ............................................38
Command bind
mng-server-ip
This configures management IP for DPI card. Command no can
be used to delete the management IP.
DPI configuration mode
bind mng-server-ip <slot-id><mng-ip-addr><server-ip-addr>
no bind mng-server-ip <slot-id>
Parameter
<slot-id>
<mng-ip-addr>
<server-ip-addr>
Confidential and Proprietary Information of ZTE CORPORATION
Description
It is the slot number where interface card
locates, ranging from 1 to 12.
It is management ip address, expressed
in dotted decimal notation. It must be IP
address of loopback interface.
It is server IP address, expressed in dotted
decimal notation.
31