Vlan Range - Zte ZXR10 8900 Series Command Reference Manual

Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
vpls mac-filter-rule <rule_number><single | range><filter_nu
mber><mac-addr><mac-addr>
no vpls mac-filter-rule <rule_number><filter_number>
<rule_number>
<single | range>
<filter_number>
<mac-addr>
� This command is supported after the platform version 4.8.02.
� Use this command to implement VPLS MAC filtering.
This example describes how to configure the VPLS instance name
on the PE.
ZXR10(config)#vpls mac-filter-rule 1
ZXR10(config)#vpls mac-filter-rule 1 single 1 0001.0002.0003
no vfi
vid
pwtype
peer
no peer

vlan range

Use this command to configure the VLAN range on the real inter-
face bounded with the VFI attribute.
VFI interface configuration
vlan range <range num><bottom limit><top limit>
no vlan range <range num>
<range num>
<bottom limit>
<top limit>
Three VLAN ranges can be configured on local interface once.
This command is provided only for ZXR10 GER and ZXR10
T64E/T128.
This example describes how to configure a VLAN range in PE VFI
interface configuration mode.
ZXR10(config)#vfi vfi1
ZXR10(config-vfi)#vlan range 1 10 80
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 VPLS Configuration
MAC filter rule number
Filter rule type. single or range
MAC filter entry number
MAC address
VLAN range number, range: 1~3
Lower limit of the VLAN range
Upper limit of the VLAN range
73