Mld Snooping Last-Member-Query-Interval; Mld Snooping Max-Group-Num - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
mld snooping mrouter-time-out
mld snooping last-member-
query-interval
Use this command to set the query interval for sending the des-
ignated packets before setting the last member leave. Restore
default with the no command.
VLAN configuration
mld snooping last-member-query-interval <interval>
no mld snooping last-member-query-interval
<interval>
If fast-leave is configured, this command won't take effect.
mld snooping fast-leave
mld snooping max-group-
num
Use this command to set maximum group number pemitted to
access VLAN. Restore default with the no command.
VLAN configuration
mld snooping max-group-num <number>
no mld snooping max-group-num
<number>
Confidential and Proprietary Information of ZTE CORPORATION
The last member query interval(in seconds):
1~25, 1s by default
The maximum groups pemitted to access:
1~256, 256 by default
Chapter 8 MLD SNOOPING
79