Show Arp-Inspection - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Default
By default, the number of ARP messages that the port processes every second is not
limited.
Example
The following example describes how to configure the maximum number of ARP messages
that port 8 processes every second to 20.
zte(cfg)#set arp-inspection port 8 untrust
zte(cfg)#set arp-inspection port 8 limit 20

4.19.5 show arp-inspection

Purpose
Shows DAI function configuration information.
Command Mode
All configuration modes
Syntax
show arp-inspection
Example
The following example describes how to show DAI function configuration.
zte(cfg)#show arp-inspection
Enabled validation: ip,dst-mac,src-mac
Enabled vlanlist
PortId
------
1
2
3
5
6
7
8
9
10
11
12
13
14
SJ-20120409144109-003|2012-07-02(R1.0)
: 1-4094
TrustType Limit(pps)
--------- ----------
Trust -
Untrust -
Trust -
Trust -
Trust -
Trust -
Untrust 20
Trust -
Trust -
Trust -
Trust -
Trust -
Trust -
4-346
ZTE Proprietary and Confidential