Char-Len; Clear Counter; Clock Board Source - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax

char-len

Use this command to set the data bit length of the asynchronous
serial port. Restore default with the no command.
Interface configuration
char-len <length>
no char-len
<length>
It is only applied to ZXR10GAR, ZXR10 ZSR.
Set the data bit of the serial port serial_1/1 to 7.
ZXR10(config)#interface serial_1/1
ZXR10(config-if)#char-len 7

clear counter

Use this command to clear the statistics data of the port.
Privileged EXEC
clear counter [<interface-name>]
<interface-name>
When an interface name is specified, the statistics data of the spec-
ified interface will be cleared, otherwise, clear statistics data of all
the interfaces.
This example describes how to clear the statistics data on interface
fei_5/1 .
ZXR10#clear counter fei_5/1
show interface

clock board source

Use this command to select single board source.
Global configuration
clock board source {free-run | system | line <interface-nam
e>}
no clock board source
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Interface Configuration
Data bit length of the asynchronous serial
port, in the range of 5~8 and the default
value is 8.
Interface name
15