Chapter 4 Ipv6 Acl Configuration; Ipv6 Acl Overview; Configuring Ipv6 Acl - Zte ZXR10 5900E Configuration Manual

Chapter 4
IPv6 ACL Configuration
Table of Contents

IPv6 ACL Overview ....................................................................................................4-1

Configuring IPv6 ACL.................................................................................................4-1

IPv6 mixed-ACL Maintenance and Diagnosis .............................................................4-7
IPv6 ACL Configuration Example ...............................................................................4-9
4.1 IPv6 ACL Overview
The Access Control List (ACL) is a kind of flow classification policies used to implement
numerous functions such as port-ACL, Unicast Reverse Path Forwarding (URPF) and
policy routing.
The IPv6 ACL mechanism is used to filter packets by the fields in IPv6 packets. One IPv6
ACL can have multiple rules, with each rule describing certain matching conditions. For
a given packet, matching starts from the first rule. Once a packet matches a certain rule,
the permit or deny action set in the rule is returned.
4.2 Configuring IPv6 ACL
Configuring IPv6 ACL
To configure IPv6 ACL, perform the following steps.
Step Command
1
ZXR10(config)#
ZXR10(config)#
SJ-20150114102049-011|2015-01-15 (R1.0)
ipv6-access-list <acl-name>
no ipv6-access-list <acl-name>
4-1
Function
Configures the specified IPv6
ACL.
Deletes the specified IPv6
ACL.
ZTE Proprietary and Confidential