ZXR10 8900 Series Command Reference (Multicast)
Purpose
Command Modes
Syntax
Defaults
Instructions
Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
56
Confidential and Proprietary Information of ZTE CORPORATION
igmp snooping
Use this command to enable IGMP SNOOPING in VLAN configu-
ration mode. Disable IGMP SNOOPING with the no form of this
command.
VLAN configuration
igmp snooping
no igmp snooping
IGMP SNOOPING is enabled by default.
IGMP SNOOPING in VLAN configuration mode takes effect only af-
ter it is enabled in global configuration mode.
igmp snooping acl
Use this command to configure a filter list for a group. Remove
the filter with the no form of this command.
VLAN configuration
igmp snooping acl <acl-number>
no igmp snooping acl
<acl-number>
In this example, only the group 224.1.1.1 are permitted for valn
1.
ZXR10(config)#acl basic number 10
ZXR10(config-basic-acl)#rule 1 permit 224.1.1.1
ZXR10(config-basic-acl)#exit
ZXR10(config)#vlan 1
ZXR10(config-vlan)#igmp snooping acl 10
igmp snooping drop
Use this command to configure the group to be in DROP mode and
not to advertise multicast data when IGMP SNOOPING is enabled
and there is no user. Advertise multicast data with the no form of
this command.
VLAN configuration
igmp snooping drop <ip-address>[num < num>]
no igmp snooping drop <ip-address>[num <num>]
Basic ACL number, range: 1~99 or
1000~1999