Show Vfi Brief; Stp-Tunnel Enable - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions

show vfi brief

show vfi brief

Use this command to show brief information about all VPLS in-
stances configured.
User EXEC and privileged EXEC
show vfi brief
This command is provided only for the ZXR10 GER and ZXR10
T64E/T128.
This example describes how to show the current VPLS virtual for-
warding instance (VFI) table.
ZXR10#show vfi brief
Total VFI number is 2
VFI name VCID
aa 2
vfi 1
The displayed field descriptions are shown below.
Field
Total VFI number is 2
VFI name
Name of the VFI
PWtype
show vfi

stp-tunnel enable

Use this command to set stp tunnel in vfi.
Vfi configuration

stp-tunnel enable

no stp-tunnel enable
enable
The platform version 4.8.22 and upgrade versions support this
command.
Use this command to set VPLS stp tunnel.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 VPLS Configuration
PWtype
Ethernet-vlan
Ethernet
Description
Total number of currently configured virtual
forwarding instances (VFIs)
Virtual forwarding instance (VFI) name
VC identifier of the virtual forwarding instance
(VFI)
Forwarding mode of this instance
Enables STP tunnel in vfi.
69