Table 169 Set Stp Instance Vlan Command; Table 170 Set Stp Name Command; Table 171 Set Stp Port Command; Table 172 Set Stp Port Linktype Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
118 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
T 1 6 9 S S
A B L E E T
Format
set stp instance
<0-
15>[add|delete]
vlan <vlanlist>
Result: This sets the mapping relation between the VLAN
and instance.
9. To set MST area name,
<name> in global configuration mode.
Table 170.
T 1 7 0 S S
A B L E E T
Format
set stp name
<name>
Result: This sets MST area name.
25. To enable/disable STP port, use command set stp port
<portlist> {enable|disable} in global configuration mode.
This is shown in Table 171.
T 1 7 1 S S
A B L E E T
Format
set stp port
<portlist>
{enable|disable}
Result: This enable/disable STP port.
26. To set port's link type of the instance, use command set
stp port <portlist> linktype {point-point|shared} in
global configuration mode.
T 1 7 2 S S
A B L E E T
Format
set stp port
<portlist> linktype
{point-
point|shared}
Result: This sets port's link type of the instance.
27. To set port packet type of the instance, use command
set stp
{IEEE|CISCO|HUAWEI|
configuration mode.
I V C
T P N S T A N C E L A N O M M A N D
Mode
Global config
use command set stp name
N C
T P A M E O M M A N D
Mode
Global
config
P C
T P O R T O M M A N D
Mode
Global
config
This is shown in Table 172.
P L C
T P O R T I N K T Y P E O M M A N D
Mode
Global
config
port <portlist>
HAMMER|extend}}
This is shown in Table 173.
Function
This sets the
mapping relation
between the VLAN
and instance
This is shown in
Function
This sets MST area name
Function
This enable/disable stp
port
Function
This sets port's link type of
the instance
packettype
in global