Command Clear Connection-All; Command Commit; Command Log-File List-Dir - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Command Manual (DPI Volume)
Example
Command
Function
Command Mode
Command Format
Parameter
Description
Example
Command
Function
Command Mode
Command Format
Example
Command
Function
Command Mode
Command Format
32 Confidential and Proprietary Information of ZTE CORPORATION
To bind management IP 1.1.1.1 to DPI card, execute the following
command:
ZXR10(config-dpi)#bind mng-server-ip 2 1.1.1.1 1.1.1.2
Command clear
connection-all
All entries in the traffic table age out and clear all traffic tables.
DPI configuration mode with prompt to be
clear connection-all <slot-id>
Parameter
<slot-id>
Age out all traffic tables and clear all traffic tables of DPI card in
slot 2.
ZXR10(config-dpi)#clear connection-all 2

Command commit

This saves signature configuration, generates entry, distributes it
to related hardware and validates it.
DPI configuration mode with prompt to be
commit
To save signature-related configuration and validate it, execute the
following command:
ZXR10(config-dpi)#commit

Command log-file list-dir

This uploads directories in log file to FTP in form of text.
DPI configuration mode
log-file list-dir <slot-id><ftp-file><local-dir>
Description
It is the slot number where interface card
locates, ranging from 1 to 12.
ZXR10(config-dpi)#
ZXR10(config-dpi)#