Table of Contents
Advertisement
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click Apply to save your changes back
to the run-time memory. Settings in the run-time memory are lost when the ONU's power is
turned off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the ONU's storage that
remains even if the ONU's power is turned off.
Use the Save link when you are done with a configuration session.
4.5 ONU Lockout
You could block yourself (and all others) from using in-band-management (managing through
the data ports) if you do one of the following:
1 Delete the management VLAN (default is VLAN 1).
2 Delete all port-based VLANs with the CPU port as a member. The "CPU port" is the
management port of the ONU.
3 Filter all traffic to the CPU port.
4 Disable all ports.
5 Misconfigure the text configuration file.
6 Forget the password and/or IP address.
7 Prevent all services from accessing the ONU.
8 Change a service port number but forget it.
Be careful not to lock yourself and others out of the ONU.
4.6 Resetting the ONU
If you lock yourself (and others) from the ONU or forget the administrator password, you will
need to reload the factory-default configuration file or reset the ONU back to the factory
defaults.
ONU User's Guide
Chapter 4 The Web Configurator
53
Advertisement
Table of Contents
