Bootloader Version: V1.6 | 2003/09/09 22:59:45
RAM: Size = 16384 Kbytes
TEST SDRAM: Verifying 832Kbytes
Press any key to stop auto-booting......
Autoboot started.
System coming up...................................
Copyright (c) 1994-2003 ZyXEL Communications Corp.
Product Name : P861, Firmware Version: V1.1(BV.0)B6
Press ENTER to continue...
3.3.2 Entering Password
The login screen appears after you press [ENTER], prompting you to enter the login username and password,
as shown next.
For your first login, enter the default login username "admin" and default password "1234".
3.3.3 Changing the Password
It is highly recommended that you change the password for accessing the Prestige.
Change the Prestige default password by following the steps shown next. Make sure you store the password
in a safe place.
Step 1.
Type "passwd" and press [ENTER].
Step 2.
Type your existing system password after (current) password, for example "1234", and press
[ENTER].
Commands Introduction
bootloader - Length: 60538 bytes, Checksum: 0x791c
kernel - Length: 445590 bytes, Checksum: 0x6500
ramdisk - Length: 1402346 bytes, Checksum: 0x7814
Figure 3-3 Console Port Power-On Display
P861 login: admin
admin
Password:
Sash command shell (version 1.1.1)
P861:/>
Figure 3-4 Login Screen
[OK]
Prestige 861 VDSL Modem
3-3