Front Panel Leds - ZyXEL Communications prestige 630m Quick Start Manual

Prestige 630 ADSL USB Modem Quick Start Guide
Step 1. First plug the square end of the USB cable into the back of your Prestige (see figures below),
and then plug the rectangular end of the USB cable into the back of your computer.
Plug this cable end into your Prestige
Step 2.
Plug one end of your telephone cable into the wall jack and the other end into the ADSL port on
your Prestige.
Messages are displayed as the modem is auto-detected and the software is
For Windows 2000 applications, the Found New Hardware Wizard window indicates
Step 3.
Follow the Windows instructions to get your new settings to take affect.
Once you restart your computer, installation of the ZyXEL ADSL USB Modem is complete.
2.2

Front Panel LEDs

The LED indicators on the front panel indicate the operational status of the Prestige 630. The table after the
following figure describes the LED functions.
2-2
installed.
the modem has been installed. Click Finish.
Plug this cable end into your computer
Install and Configure your Modem