49.1.18 Annex L Enable Command
Syntax:
ras> adsl annexl enable <portlist>
This command turns on the Annex L reach extended feature on the specified ADSL2 port(s).
Annex L can be used with Annex A (ADSL over POTS), not Annex B (ADSL over ISDN).
The following example turns on the Annex L feature for port 5.
Figure 205 Annex L Enable Command Example
ras> adsl annexl enable 5
49.1.19 Annex L Disable Command
Syntax:
ras> adsl annexl disable <portlist>
This command turns off the Annex L reach extended feature on the specified ADSL2 port(s).
The following example turns off the Annex L feature for port 5.
Figure 206 Annex L Disable Command Example
ras> adsl annexl disable 5
49.1.20 Annex M Enable Command
Syntax:
ras> adsl annexm enable <portlist>
This command turns on the Annex M double upstream feature on the specified ADSL2/2+
port(s). This has the upstream connection use tones 6 to 63.
The following example turns on the Annex M feature for port 5.
Chapter 49 ADSL Commands
IES-1248-51 User's Guide
317