Configure A Static Vlan; Figure 18 Vlan: Vlan Status; Table 15 Vlan: Vlan Status - ZyXEL Communications P-871H Series User Manual

P-871H Series User's Guide

Figure 18 VLAN: VLAN Status

The following table describes the labels in this screen.

Table 15 VLAN: VLAN Status

LABEL
The Number of
VLAN
Index
VID
Port Number
Elapsed Time
Status
Poll Interval(s)
Stop
Change Pages

6.3.2 Configure a Static VLAN

Use a static VLAN to decide whether an incoming frame on a port should be
46
DESCRIPTION
This is the number of VLANs configured on the Prestige.
This is the VLAN index number.
This is the VLAN identification number that was configured in the VLAN Setup
screen.
This column displays the ports that are participating in a VLAN. A tagged port is
marked as T, an untagged port is marked as U and ports not participating in a VLAN
are marked as "–".
This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
This field shows how this VLAN was added to the Prestige; dynamically using GVRP
or statically, that is, added as a permanent entry.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Set
Interval.
Click Stop to halt polling statistics.
Click Previous Page or Next Page to show the previous/next screen if all status
information cannot be seen in one screen.
Chapter 6 VLAN