Panel Operation; Menu Tree; Led Status Screen - ZyXEL Communications 2864 Series User Manual

The cursor is blinking above one of these on-screen buttons - a dark rectangle which
may be moved using the keys next to the display. The modem also displays the cur-
rent status and settings in the idle screen:
Information
Link Option
Link Speed
Error Control
Data Compression
Line Type
Data Format
DTE Speed

Panel Operation

Use the four arrow keys to manipulate the menu tree.
Left/Right
arrow keys
Up arrow key
Down arrow key

Menu Tree

Fig. 5.1 on the folded pages shows the menu tree structure. There are two main
menu trees. One is the CONFIGURATION menu, the other is the DIAGNOSTIC menu.
Fig. 5.2 shows the submenus under the CONFIGURATION menu. In Fig. 5.1, there is
one idle screen and four data state screens. In data state, screens (1) to (4) can be ac-
cessed by pressing the left or right arrow key. A dialing menu can be accessed from
the idle screen by activating the D on-screen button. Flip between idle screen and
menu screen by pressing the MENU or up arrow key.

LED Status Screen

Either in idle state or data state, there is an LED status screen that can be accessed
and displayed by pressing the left or right arrow key at the menu's top level. This
used for horizontal item selection and option selection.
also called the MENU key, is used for vertical menu selection
and is used to access the previous menu. The up arrow key
also serves as a quit command when you want to stop the
current action.
also called the ENTER key, is used solely to register the cho-
sen selection and is very similar to the Carriage Return key
or Enter key on a standard keyboard.
5–2
Example
V34 (V.34)
28800 (bps)
V42 (implied by V.42bis)
V42b (V.42bis)
DL (Dial-up line)
AS (asynchronous)
115200 (bps)