5.1.2 STAND-BY displaying at the end of " SELF TEST " phase
STAND-BY : Mode in which the ventilator is placed before the
start-up or the switching off
STAND-BY : The operative mode can be selected, the ventilation
parameter related to the operative mode of interest can be
configured or modified.
Rotate and/or press the encoder knob to select the box of the
operative mode or of the ventilation parameter to be set and/or
modified.
Press the AUT soft key to start ventilating a patient using an
automatic operative mode.
5-6
For further information on operating logic and how setting the
operating parameters of Operative Modes, make reference to the
chapter, cfr. 5.3 and 5.5.
User's Manual, version DU3300105