Graphics Setting Area ( E ) - Siare Morpheus E User Manual

Red colour indication, flashing: power failure indication.
Red colour indication, crossed, flashing: indication of power
failure alarm "inhibition".
5.8

Graphics setting area ( E )

How to SET a type of graphic
5-14
The power failure alarm is reported both by the visual signals of the
corresponding message in the alarm area and the high priority red
bell, as well as by the flashing electrical power symbol.
Use this function to set the type and number of graphics (1 or 2 or
no graphics), displayed during the anaesthesia unit operation.
The selected graphics are shown on the L or R side of graphics
displaying and gas monitoring area (H).
• Press and rotate the encoder to select the desired graphic
setting area.
• Press the encoder to activate the graphic setting area.
• Rotate the encoder to select the type of graphic to be
displayed.
• Press the encoder to confirm the type of graphic to be
displayed
•
The PAW graphic is displayed during the anaesthesia unit
operation.
User's Manual, version DU3300105