Graphics Displaying Area ( H - E ) - Siare Morpheus E User Manual

5.11 Graphics displaying area ( H - E )

The system allows displaying and selecting:
•
the type and the number (max. 2) of graphics available (Graphics setting area)
•
the type of graphic (SETUP - GRAPHIC: Line / Square)
•
the number and consequently the relevant dimension (GRAPHICS
VISUALIZATION: Single / Double)
•
•
5-38
Press and rotate the encoder knob to select the Graphic
displaying Area (E)
Press and rotate the encoder knob to select the graphic to be
displayed.
The graphics displayed are defined by the Graphic Setting
Area (E) used to set the type and no of graphics (1 or 2 or
none)
The selected graphics are shown respectively on the L or R
side in the graphics displaying area and gas monitoring (H).
At the paragraph "Graphics setting area" (cfr. 5.8) there are listed
the types of graphics/parameters available and how to display them.
•
No displaying enable, PAW, FLOW, Vte, CO
ENF, ISO, SEV, DEV, Vt / PAW, F / Vt, RP1
•
Further available parameters.
, N O, O , HAL,
2 2 2
User's Manual, version DU3300105