Displaying at the end of the first 'SELF TEST' phase.
Checking of the Acoustic alarm functioning
•
In PRESENCE of acoustic alarm, press Alarm Reset (see the
picture below)
•
In ABSENCE of acoustic alarm, do not press Alarm Reset (on
the display an error message appears 'Press AUT for starting'
(see picture at the following page)
" SELF TEST " completed.
•
Press the MAN key to enter in TEST ON DEMAND (see cfr. 6)
•
Press the AUT key to enter the ventilator display in STAND-BY mode.
6-26
User's Manual, version DU3300105