Table of Contents
Advertisement
3.4.2 Connections to valves group
O 2 cell
1. Unpack carefully the O 2 cell
2. Pull up the valves group cover.
3. Insert and screw the cell: in the space
marked with the script "O 2 SENSOR".
4. Verify that the electric cable of cell
connection is positioned into dedicated
space.
•
Connect the pin on the O 2 sensor
•
Connect the RJ connector on the
dedicated outlet within the valves
group.
3-10
WARNING. Risk of injury for the user
To avoid risks of electric shocks and/or break of components, during
interventions, verify that the anaesthesia unit has been
disconnected from power supply.
User's Manual, version DU3300105
Advertisement
Table of Contents
