6.3.6 Fresh gases exit – TO and FRO patient circuit
Apply to the TO and FRO patient circuit to the
anaesthesia unit as shown in the picture.
MAN operative mode
MORPHEUS
WARNING! Risk of injury for the patient.
Do not connect the patient directly to the fresh gases exit without an
adequate ventilation circuit with pressure relief system.
If the patient is connected to the fresh gases exit without an
adequate ventilation circuit with pressure relief system, there will be
an high pressure dangerous for the patient.
To activate the TO and FRO patient circuit
act on the fresh gases exit selection control:
enabling of the exit of fresh gases exit
connector (AUX).
6-13