Table of Contents
Advertisement
The instructions for carrying out more detailed tests, for
troubleshooting and for other interventional procedures, information
intended for qualified technical personnel, are contained in the
relative chapter.
WARNING! Risk of injury for the user / patient
To ensure the safety of the patient and the operator, the
anaesthesia unit must be inspected and checked when the limit of
1000 working hours has been reached or, in the event of limited use
of the machine, at least every 6 months.
All maintenance and/or repair operations require perfect knowledge
of the equipment and must therefore only be carried out by highly
qualified personnel, specifically trained and formally authorised by
SIARE.
Inappropriate intervention or unauthorised modifications can
compromise safety and cause danger to the patient.
To avoid the danger of electric shock during maintenance and/or
repair operations, make sure that all power supplies have been
disconnected, disconnect the power supply source (positioning the
special danger signs) and disable all the protection switches of the
equipment.
On completion of the maintenance operations, all removed
components should be disposed of according to current waste
disposal regulations.
Components that cannot be destroyed should be sterilised before
disposal.
Follow current regulations for the disposal or recycling of all
removed components.
Before performing the maintenance or repairing works, also in case
of returning the equipment for repairing to manufacturer, it is
required to clean and disinfect the equipment.
10-2
User's Manual, version DU3300105
Advertisement
Table of Contents
