3.2.1 Self Test phase
During Self Test phase, the software carries out the self-diagnostic tests and checks
a series of devices necessary for safe operation of the Unit /patient ( for further
details ABOUT self test,please see on chapter see on 4.7.1 ).
3-6
•
The anaesthesia unit turns ON and
the automatic Self Test phase
starts.
•
Please close the patient circuit.
•
Acoustic Alarm test :
acoustic alarm is audible, please
push the RESET key ".
The Self Test phase completed
successfully.
•
Press OK to begin
•
Press Cancel for other tests
User manual, DU33ND101
"
If the