Displaying at the end of the first phase of 'SELF TEST'
Checking of the acoustic alarm operation
•
IN PRESENCE of the acoustic alarm, press Alarm Reset (see
picture here below).
•
IN ABSENCE of acoustic alarm, do not press Alarm Reset
(on the display an error message 'Press AUT to start' appears,
see the picture below)
" SELF TEST " completed
•
Press the MAN key to enter in TEST ON DEMAND (see cfr. 6)
•
Press the AUT key to enter the ventilator display in STAND-BY mode.
5-4
During " SELF TEST " phase, the ventilator software carries out the
self-diagnostic tests and checks a series of devices necessary for
the safety of Morpheus Anaesthesia unit.
User's Manual, version DU3300105