Connection Of Medical Gas Supply From Cylinders - Siare Morpheus E User Manual

WARNING! Risk of power failure.
If all the gas supply hoses (from main system and cylinder)are not
correctly connected, the system will not be available in case of gas
supply failure.
Ensure that all supply hoses are connected according with the
indication engraved on the gas inlet bloc and the illustrations in the back
side of the equipment.
After having connected the supply hoses, verify that the system is
correctly working.

6.3.2 Connection of medical gas supply from cylinders

Screw the gas supply hoses (O 2 , N 2 O) to the relevant connectors of the gas supply
group. Screw the gas supply hoses (O 2 , N 2 O) to the relevant connectors of the
cylinders pressure reducers (O 2 , N 2 O).
Ensure that all the gas supply hoses are connected and work correctly. The cylinders
hoses are supplied with the screw connector DISS type.
We suggest you to install on reducers the same inlets used on the
distribution system so as to make switching from one system to the
other safe and quick (at least for oxygen).
WARNING! Risk of gas power failure.
In case of failure of the medical gas distribution system of the hospital,
the gas cylinders of the anaesthesia unit will provide a reserve gas
supply.
To avoid a complete gas power failure, the cylinders must always
remain on the anaesthesia unit, with the pressure reducers closed
(even if the anesthesia unit is connected to the medical gas distribution
system of the hospital).
WARNING! Risk of gas power failure.
If all the pressure reducers are open during operation with the medical
gas distribution system of the hospital, there is the danger of undesired
erogation of medical gas from reservoir cylinders.
Close the cylinders pressure reducers in case the hospital medical gas
distribution system is sufficient.
MORPHEUS
6-9