Siare Morpheus E User Manual page 279

Self-Test
Ventilation modalities
Breathing rate
I:E Ratio
Inspiratory time
Inspiratory pause
SIMV rate
Tidal volume
Minute volume
Airways pressure limit
(PLIM)
Support pressure (PS)
PEEP
Inspiratory Flow (FLOW)
Oximeter
Bronchomanometer
11-6
Primary test: at anaesthesia unit's start-up, a control test of Turbine
presence, Medical Gas Supply presence, INSP and EXP flow sensors
operation, pressure sensor, patient circuit losses, back-up battery state,
oxygen cell, integrity of audible alarm is automatically performed. This test
takes around 15 seconds.
Tests on demand: the anaesthesia unit has a tests on demand which is
activated by the user in the ventilator menu. This subtest permits to verify the
dead space and losses or to perform the oxygen cell calibration.

APCV

APCV-TV

PSV

APNEA BACK-UP

SIMV (Volumetric +PS; SPONT)

VC/VAC

VC/VAC BABY (integrated NEONATAL ventilation mode)

MANUAL
From 4 to 120 bpm (step 1 bpm)
1:1, 1:1.5, 1:2, 1:3, 2:1, 3:1
From 0,2 to 5 sec.
From 0 to 60% of inspiratory time
From 1 ÷ 119 bpm
From 5 to 1500 ml (< 50ml: step 1ml / 50-100ml: step 5ml / >100ml step 10ml)
From 1 to 30 liters
From 6 ÷ 60 cmH 2 O
From 5 ÷ 60 cmH 2 O
OFF, 3 ÷ 30 cmH 2 O (step 1 cmH 2 O)
Selectable ramp from 10 to 80 L/min (step 10 L/min)
Minimum resolution 1% - Automatic calibration procedure
-20 ÷ 80 cmH 2 O
User's Manual, version DU3300105